CMDP - Mission Debrief & Display
The Common Mission Debrief Program (CMDP) is a Windows-based software product designed by aircrews and flight test engineers to support debrief and analysis of compliant IRIG106 Chapter 10 mission data recorders. CMDP provides a full range of capabilities from aircrew mission debrief to engineering data analysis in development test, operational test, operational training and combat environments.
NetView - Real-time Data Processing and Display
NetView is a newly developed software application which provides time aligned real-time decoding, display, recording, reproduction & distribution from compliant IRIG106 Chapter 10 data sources and Network Based Instrumentation Systems. NetView also provides full duplex, user configurable command and control for network devices within the real-time data processing/display environment.
VuSoft - Flight Test Data Decoding, Analysis & Display
VuSoft provides simultaneous recovery, recording, display and distribution of real-time telemetry and other serial data streams. It accepts data in IRIG106 Chapter 4, 8 and 10 formats and outputs data to displays and networked display and recording workstations.
Since 2002 the JDA Systems developed CPAS systems have been used to support playback, display, reconstruction, and data analysis of IRIG-106 Chapter 10 recorders. The CPAS-p is the only DoD fully approved and qualified IRIG-106 Chapter 10 playback and PCM reconstruction system on the market today. The CPAS Product family also includes a fully compliant Ground Based IRIG-106 Chapter 10 recorder/reconstructor, and client software that can remotely command,control and setup the recorder as well as receive Chapter 10 data from a network broadcast and display all data channels time synchronized.
Since 2002 the JDA Systems developed CPAS systems have been used to support playback, display, reconstruction, and data analysis of IRIG-106 Chapter 10 recorders. The CPAS-p is the only DoD fully approved and qualified IRIG-106 Chapter 10 playback and PCM reconstruction system on the market today.
The CPAS Product family also includes a fully compliant Ground Based IRIG-106 Chapter 10 recorder/reconstructor, and client software that can remotely command,control and setup the recorder as well as receive Chapter 10 data from a network broadcast and display all data channels time synchronized.
DataHUB - IRIG-106 Chapter 10 Recorder/Reproducer
The DataHUB is a fully compliant IRIG 106 Chapter 10 USB plug-n-play input/output device that natively creates and decodes IRIG 106 Chapter 10 PCM and time packets. This small high-accuracy, low-cost portable device provides capabilities normally found in much costlier traditional recorder-reproducer systems. Application software provided with the DataHUB includes iRAP, iRIG Recorder/reproducer Application Program and a full featured Application Programmer Interface (API).
A one-man portable, environmentally sealed telemetry systems that can perform as an independant, or network connected telemetry system. These systems can also perform open and closed-loop system checkout as and pre-flight of telemetry systems in the field or in the lab. These systems contain all of the necessary components to receive, record, display, and analyze telemetry data in real-time from any location.
JDA System's TDS systems recover, store, process, display and distribute multiple streams of telemetry data. These PC, Windows-based systems run VuSoft telemetry processing software and may be configured with additional hardware and software options for most application requirements. The TDS systems may be pruchased as either a rack-mounted system, or as a Toughbook-based portable telemetry system using the USB Decom Appliance, VT-RF-70 Receiver, etc
VT-RC-70: PCM/FM Telemetry Receiver
Both receiver and down converter are USB powered and operated. The down converter (VT-DC-70) and receiver can be seperated to allow the down converter to be installed near or in the head of an existing or new telemetry receiving antenna eliminating long RF cable runs with attendant high-frequency signal losses and need for a low-noise amplifier. It down converts the L, Upper L, S and NATO RF Bands to 70 MHz making it compatible with the IF input on most telemetry receivers.
VT-RC-74: Telemetry Receiver
The VT-RC-74 compact receiving system combines between one and four high performance RF multiple band receivers, a pre and post detect diversity combiner, optional digital bit sync and optional frequency analyzer with full oscilloscope and EYE pattern display in a single 1U height 19 inch rack mountable chassis.
PCI-SD4 - PCI Decom
The PCI-SD4 is the input card for JDA's software decom. Delivered with an input/output breakout box. The PCI-SD4 can be used with VuSoft software for a full performance, one to four stream telemetry recording, display and analysis system. VuSoft libraries are available for most telemetry formats.
The BSYS4 bit synchronizer is a daughter card for the PCI-SD4 that supports one to four streams at bit rates up to 20 Mbps per stream. Input code types include NRZ-L/M/S, BIO-L/M/, DM-M/S and RNRZ/RNRZR-9/11/15/17/23.
USB Decom
The USB-SD4 is a one to two stream decom with optional bit sync packaged in a “brick-sized” enclosure. Programming and data output use the USB 2.0 bus that is provided on most computers. It is ideal for use with laptops in portable systems. May be used with VuSoft for a full performance telemetry recording, display and analysis system.
The VT-004 is a lightweight, portable tracking antenna that can receive signals in the L or S band and can track from directly overhead down to below the horizon with unrestricted azimuth rotation. It is excellent for flight line applications and small test ranges and can be transported by commercial aircraft. A transparent radome is available for permanent outdoor installations.